1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 57
1 TROUBLESHOOTING FOR THE HARDWARE
Hanging Finisher MJ-1031
Be careful not to let your fingers be caught between the equipment and the Finisher (optional).
This could injure you.
1
Separate the Finisher from the equipment.
Press the lever to unlock the Finisher and slowly separate it from the
equipment, placing your hands on the front and rear of the Finisher.
2
Open the staple cartridge unit cover.
3
Remove the staple cartridge.
4
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
To Next Page
Loading...
Need help?
General
