1 TROUBLESHOOTING FOR THE HARDWARE
58 Refilling With Staples
5
After the transparent cover is lifted, remove the empty
staple case.
6
Fit the new staple case into the staple cartridge.
Push the staple case into the cartridge until it clicks.
In this step, do not remove the seal bundling the staples.
7
Push the transparent cover down to its original
position, and pull out the seal bundling the staples
8
Fit the staple cartridge into the stapler.
Insert the staple cartridge until it is caught by the latch of the staple
cartridge and is fixed with a click.
9
Close the staple cartridge unit cover.
1
2
2
1
To Next Page
Loading...
Need help?
General
