154
5.USING THE EDITING FUNCTIONS
7.EDITING (Cont.)
5
Negative/Positive reversal
This function allows you to make copies reversing the contrasting density on the whole face of original.
• This function can be used only when the colour mode is “BLACK” or “FULL COLOUR”.
1
Place paper in the drawer(s).
• When using this mode in bypass copying, be sure to specify the paper size ( P.84 “1.Paper Selection”).
2
Place the original(s).
3
Press the [EDIT] button to enter the edit menu, and then press the
[EDITING] button.
4
Press the [NEG/POS] button.
• Select other copy modes as required.
5
Press the [START] button.
To Next Page
Loading...
