40
1.BEFORE USING EQUIPMENT
2.Turning Power On / Shutdown (Cont.)
1
3
“Processing job will be deleted. Are you sure you want to shutdown?”
appears on the menu. Press the [YES] button.
• To cancel the shutdown operation, press the [NO] button.
4
“Shutdown in progress” appears on the menu. After a while, the
equipment is shut down and the power is turned OFF.
• The power switch automatically returns to the OFF position.
Shutting down with the [ENERGY SAVER] button
The equipment can also be shut down by following the procedure below.
1
Press the [ENERGY SAVER] button on
the control panel.
To Next Page
Loading...
