Toshiba E-studio 281c - 2. Confirming Print Job Status

239
8
Pausing print jobs
The 11th job or later counting from the one in progress can be paused.
1
Select the job you want to pause on the print job list, then press the
[PAUSE] button.
• When the [PAUSE] button is pressed, the display of this button changes to [RESUME].
• When the job is paused, the next job is started.
Releasing print job
Press the [RESUME] button. A job once paused will not be printed out unless the [RESUME] button
is pressed.
Moving print jobs
The 11th job or later counting from the one in progress can be moved.
1
Select the job you want to move on the print job list, then press the
[MOVE] button.
• If the corresponding job is not displayed on the page, press the [Prev] or [Next] button to switch the page.