EasyManuals Logo

Toshiba E-studio 281c Operator's Manual

Toshiba E-studio 281c
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
14
General Precautions (Cont.)
When using the Multifunctional Digital Colour Systems
Warning
• Do not take off the cover of the equipment; otherwise you could be injured or get an electric shock.
• Do not remove or connect the plug with wet hands, as this could give you an electric shock.
• Do not place any container with liquid (flower vases, coffee cups, etc.) on or near the equipment. This
could cause a fire or give you an electric shock.
• Keep paper clips and staples away from the air vent. If not, a fire could result or you could get an elec-
tric shock.
• If the Multifunctional Digital Colour Systems becomes excessively hot, smoke comes out of it or there
is an odd smell or noise, proceed as follows.
Turn the main switch OFF and remove the plug from the outlet, then contact your service representa-
tive.
• If the Multifunctional Digital Colour Systems will not be used for more than one month, remove the plug
from the outlet for safety purposes during that time.
If an insulation failure occurs, this could cause a fire or give you an electric shock.
Caution
• Do not place heavy objects (4 kg or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
• Do not place heavy objects (4 kg or more) on the Multifunctional Digital Colour Systems. If the objects
fall off, this could cause injury.
• Do not touch the fuser unit or the metal area around it. Since they are very hot, you could be burned or
the shock could cause you to get your hand injured in the machine.
• When changing the angle of the control panel, be careful not to catch your hands in the gap between
the equipment and the control panel. This could cause personal injury.
• Be careful not to let your fingers be caught when closing the drawer. This could injure you.
• Be careful not to let your fingers be caught between the equipment and the finisher (optional). This
could injure you.
• Be careful not to let your fingers be caught between the equipment and the automatic duplexing unit.
This could injure you.
• Do not place 3 kg or more of objects on an optional work table. Breaking the work table could cause
personal injury.
• Do not touch the metal portion of the guide plate in the automatic duplexing unit as it could burn you.
• Do not touch the hinge (= a connecting part) on the rear side of the Reversing Automatic Document
Feeder (optional). This could catch and injure your fingers when you open or close the Reversing Auto-
matic Document Feeder (optional).

Table of Contents

Other manuals for Toshiba E-studio 281c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba E-studio 281c and is the answer not in the manual?

Toshiba E-studio 281c Specifications

General IconGeneral
BrandToshiba
ModelE-studio 281c
CategoryAll in One Printer
LanguageEnglish

Related product manuals