36
1.BEFORE USING EQUIPMENT
2.Turning Power On / Shutdown (Cont.)
1
User management
Users of the equipment can be limited and the available functions and past record of each user can be
controlled by using the user management function. When the equipment is managed under this function,
turn the power of the equipment ON and enter the information required (e.g. user name, password) to use
the equipment. The menu for entering user information also appears when you pressed the [ACCESS]
button on the control panel or automatic function clear has worked. Enter the information following the pro-
cedure below.
1
The menu for user authentication appears.
MFP local authentication, LDAP authentication
Windows Domain Authentication
• The domain name previously set by the network administrator is displayed in [DOMAIN].
If the domain name belonging to your organization is not displayed, press the [DOMAIN] button and select it.
To Next Page
Loading...
