Toshiba E-studio 281c - Selecting Finishing Modes; Type of Finishing Mode

96
3.SETTING OF BASIC COPY MODES
3
4. Selecting Finishing Modes
Type of finishing mode
The available finishing modes differ depending on the type of finishing device installed (MJ-1024,
MJ-1023, MJ-1022, MJ-1101, MJ-6004 or MJ-6101). Check the available finishing modes with the table
below.
Yes: Available
No: Not available
MJ-1024: Saddle Stitch Finisher
MJ-1023: Multi Position Staple Finisher
MJ-1022: Hanging Finisher (for e-STUDIO281c/351c only)
MJ-1101: Finisher
MJ-6004: The Hole Punch Unit for MJ-1024 and MJ-1023
MJ-6101: Hole Punch Unit for MJ-1101
Finishing device
Type of finishing mode
Sort/
Group
Rotate
sort
Staple
sort
Maga-
zine sort
Maga-
zine sort
& Saddle
stitch
Saddle
stitch
Hole
punch
MJ-1024 + MJ-6004 Yes Yes Yes Yes Yes Yes Yes
MJ-1024 Yes Yes Yes Yes Yes Yes No
MJ-1023 + MJ-6004 Yes Yes Yes Yes No No Yes
MJ-1023 Yes Yes Yes Yes No No No
MJ-1022 Yes Yes Yes Yes No No No
MJ-1101 + MJ-6101 Yes Yes Yes Yes No No Yes
MJ-1101 Yes Yes Yes Yes No No No
No finishing device Yes Yes No Yes No No No