89
3
2. Switching Colour Mode
This function allows you to switch colour modes. There are three types of colour modes as follows:
1
Press the [FULL COLOUR], [BLACK] or [AUTO COLOUR] button.
When you use “AUTO COLOUR”, note the following points:
When the coloured area in an original is extremely small, when the colours of the original are close to black, or
when the colours of an original are too light, these originals may be automatically copied in black even though
they are coloured. Also yellowed originals or originals with a coloured background may be automatically copied in
full colour even though they are black-and-white. Select the full colour mode or the black mode depending on the
state of the original to reproduce exact colours.
FULL COLOUR: All originals are copied in full colour regardless of the type of each original.
BLACK: All originals are copied in black regardless of the type of each original. (Default set-
ting)
AUTO COLOUR: The equipment automatically judges the type of each original. Coloured originals are
copied in full colour and black-and-white originals are copied in black.
To Next Page
Loading...
Need help?
General
