23
1
Configuration of options
1. Original Cover (KA-3511PC)
Holds an original.
2. Reversing Automatic Document Feeder (MR-3018)
Automatically feeds a placed stack of originals one by one to have them copied.
3. Bridge Unit (KN-3511A)
Acts as a relay for the finisher and this equipment.
4. Large Capacity Feeder (KD-1012)
This feeder enables you to feed up to 2500 sheets (80 g/m
2
) of A4 paper.
5. Paper Feed Pedestal (KD-1011)
Adds one drawer to the equipment.
6. Additional Drawer Module (MY-1021)
Enables one drawer to be added to the Paper Feed Pedestal.
7. Finisher (MJ-1101)
This finisher enables sort/group finishing and stapling. The Hole Punch Unit (optional, MJ-6101) can
be installed to this finisher. The Bridge Unit (optional, KN-3511A) is required for the installation of this
finisher.
10
7
9
8
3
4 5 6
1
11 12
2
To Next Page
Loading...
