282
9.BLINKING GRAPHIC SYMBOLS
3.Replace Toner Cartridge Symbol (Cont.)
9
9
Press the [FINISH] button.
• When you are replacing two or more cartridges at a time, repeat the procedure from steps 1 to 8, replace the
desired cartridges, and then press the [FINISH] button.
• “Wait adding toner” appears. The equipment automatically starts supplying toner.
6
Holding the new toner cartridge, pull out
the seal in the direction of the arrow.
7
Insert the cartridge completely.
• Insert the cartridge until there is a click.
8
Close the front cover.
To Next Page
Loading...
