Toshiba E-studio 281c - 10. “Check paper size setting on control panel for drawer N”

333
10
7
Press the drawer button corresponding to the one mentioned in the
message on the touch panel.
8
Press the paper size button corresponding to the one placed in the
drawer.
 P.43 “4.Setting Copy Paper”
9
Place the removed paper and the original, and then try to copy again.
• When “POWER FAILURE” appears, press the [FUNCTION CLEAR] button twice to clear the message.
See  P.329 “8.“POWER FAILURE”” for details.
During copying (using the bypass tray)
2
Remove the jammed paper.
 P.285 “5.Jam Symbols”
1
Turn the power of the equipment OFF.
• You cannot shut down the equipment.