Toshiba e-STUDIO203 - Page 75

December 2005 © TOSHIBA TEC e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 55
2
971 General Toner near empty thresh-
old value
ALL EUR: 1
UC: 1
CND: 3
Other: 1
<0-3>
M Performs adjustment
for the toner near-
empty detection timing.
0: Toner near empty
threshold value
(long)
1: Toner near empty
threshold value
(standard)
2: Toner near empty
threshold value
(short)
3: Toner near-empty
detection disabled
This code is automati-
cally changed to "3"
when the code 08-695
has been set at "0".
This code is automati-
cally changed to "1"
when the code 08-695
has been set at "1".
1
1372 Counter Heater and energizing time
accumulating counter Dis-
play/0 clearing
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (when power of
the equipment is ON)
but does not count at
the Sleep Mode.
1
1378 Counter Counter for period of time
fuser unit is at ready tem-
perature
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (when the equip-
ment is at ready status).
1
1380 Counter Counter for period of time
fuser unit is at printing tem-
perature
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (during printing).
1
1382 Counter Counter for period of time
fuser unit is at energy sav-
ing temperature/Counter
reset
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (when the equip-
ment is in the Energy
Saving Mode).
1
1385 Counter Number of output pages
(Thick paper 1)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
1386 Counter Number of output pages
(Thick paper 2)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
1388 Counter Number of output pages
(OHP film)
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
1410 Counter Counter for period of toner
cartridge rotation time
ALL 0
<8 digits>
M Counts up the period of
rotation time of the
toner cartridge.
1
1411 Counter Counter for envelope ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
06/05