2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
SELF-DIAGNOSIS MODES
2 - 9
[4]
A Job Separator connection Not connected Connected
B Bridge unit connection Not connected Connected
C Offset Tray initial position detection Initial position Other than
initial position
D Bridge unit paper full detection Full Not full
E Bridge unit cover opening/closing switch Cover opened Cover closed
F Bridge unit paper exit sensor Paper present No paper
G Bridge unit transport sensor Paper present No paper
H Job Separator upper tray paper full detection Full Not full
[5]
A- --
B- --
C- --
D- --
E- --
F RADF connection Connected Not connected
G Platen SW detection Opened Closed
H Scanner home position detection Home position Other than
home position
[6]
A- --
B- --
C- --
D APS sensor (APS-R) Original
present
No original
E APS sensor (APS-C) Original
present
No original
F APS sensor (APS-3) Original
present
No original
G APS sensor (APS-2) Original
present
No original
H APS sensor (APS-1) Original
present
No original
[7]
A [RADF] Original tray length sensor Original
present
No original
B [RADF] Original empty sensor Original
present
No original
C [RADF] Jam access cover sensor Cover opened Cover closed
D [RADF] RADF opening/closing sensor RADF opened RADF closed
E [RADF] Original exit/reverse sensor Original
present
No original
F [RADF] Original intermediate transport sensor Original
present
No original
G [RADF] Read sensor Original
present
No original
H [RADF] Original registration sensor Original
present
No original
Digital
key
Button Items to check
Contents
Highlighted
display
e.g.
Normal
display
e.g.
To Next Page
Loading...
