2 SETTING ITEMS (ADMIN)
102 INTERNET FAX
INTERNET FAX
This menu allows you to set the options below.
Depending on the model, [INTERNET FAX] is available only when the Scanner Kit or Printer/Scanner Kit is installed.
Internet Fax Message Properties
Specifies the details of messages sent by the Internet Fax transmission.
You can set the following options:
- FROM ADDRESS
- FROM NAME
-BODY
Internet Fax Fragmentation
You can send the Internet Fax job split into the fragment size specified. This option can reduce transmission errors
caused by network traffic problems.
Internet Fax Body String Transmission
You can specify whether or not to send the body string.
For instructions on how to display the INTERNET FAX screen, see the following page:
P.47 “Accessing the Admin Menu”
To enable Internet Fax, you must have an E-mail address entered in the [FROM ADDRESS] box.
When you press [FROM ADDRESS], [FROM NAME] or [BODY], the on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following page:
P.154 “On-screen keyboard”
Item name Description
FROM ADDRESS Press this button to enter the E-mail address of this equipment.
FROM NAME Press this button to enter the name of this equipment.
BODY Press this button to enter the message body.
FRAGMENT PAGE
SIZE (KB)
Select the desired fragment page size from the drop-down list. Press [NONE] to disable the fragmentation.
BODY STRING
TRANSMISSION
ENABLE — Press this button to send the message body.
DISABLE — Press this button to not send the message body.
To Next Page
Loading...
Need help?
General
