2 SETTING ITEMS (ADMIN)
CHANGE USER PASSWORD 121
CHANGE USER PASSWORD
When the MFP Local Authentication function is used, administrators can change the authentication password assigned for
each user in case it is forgotten.
[CHANGE USER PASSWORD] is available only when the MFP Local Authentication function is enabled. This function
can be enabled from TopAccess administrator mode. For details, refer to the TopAccess Guide “Chapter 8:
[Administration] Tab Page”.
For instructions on how to display the CHANGE USER PASSWORD screen, see the following page:
P.47 “Accessing the Admin Menu”
1
On the CHANGE USER PASSWORD screen, set a new password and complete the
setting.
1) Press [USER NAME] to enter the user name for which the password is to be changed.
2) Press [NEW PASSWORD] to enter the new password.
3) Press [RETYPE NEW PASSWORD] to enter the new password again.
4) Press [OK].
The password is now changed.
When you press [USER NAME], [NEW PASSWORD] or [RETYPE NEW PASSWORD], the on-screen
keyboard is displayed.
For details of the on-screen keyboard, see the following page:
P.154 “On-screen keyboard”
The input password appears as asterisks (*) in the [NEW PASSWORD] and [RETYPE NEW PASSWORD]
boxes.
To Next Page
Loading...
Need help?
General
