2 SETTING ITEMS (ADMIN)
Accessing the Admin Menu 47
Accessing the Admin Menu
Follow the steps below to display the ADMIN menu in the USER FUNCTIONS screen.
1
Press the [USER FUNCTIONS] button on the control panel to access the USER
FUNCTIONS menu.
2
Press the [ADMIN] tab.
When the User Management function is disabled, you must enter the administrator password.
Proceed to the next step.
When the User Management function is enabled, you must log into the MFP as a user with administrator
privileges.
When you press the [ADMIN] tab, the ADMIN menu will be displayed.
Proceed to step 5.
If you log into the MFP as a user without administrator privileges, the [ADMIN] tab will be unavailable.
Setting role information allows you to give privileges to users. For details of role information, refer to the
TopAccess Guide “Chapter 7: [User Management] Tab Page”.
3
Press [PASSWORD].
The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following page:
P.154 “On-screen keyboard”
4
Enter the administrator password and press [OK].
The ADMIN menu is displayed.
If the administrator password has not been changed before, enter the default administrator password
“123456”.
The input password appears as asterisks (*).
5
Proceed with the administrative operation that you require.
Pressing on the ADMIN menu (1/2) displays ADMIN menu (2/2).
ADMIN menu (1/2) ADMIN menu (2/2)
To Next Page
Loading...
Need help?
General
