2.SETTING ITEMS (ADMIN)
NETWORK 91
2 SETTING ITEMS (ADMIN)
Setting the Ethernet speed
You can specify the Ethernet speed.
The options vary depending on the model.
Some models have [AUTO] while others have [AUTO (-100MB)] and [AUTO (-1000MB)] as options. If you do not
know the speed of the network you are connected to, select [AUTO], or either [AUTO (-100MB)] or [AUTO (-
1000MB)] depending on your model instead of the button of a specific speed and mode.
The following models do not enter the Super Sleep mode even if [ENABLE] is selected in the SLEEP/SUPER
SLEEP screen when ETHERNET is set to [AUTO (-1000MB)], [1000BASE FULL], or [1000BASE].
- e-STUDIO456 Series
- e-STUDIO856 Series
- e-STUDIO306LP
The current Ethernet speed is displayed above the buttons. “Link not detected” is displayed when links failed to be
detected.
If the network is not stable, turn the power of the equipment OFF and then back ON.
Item name Description
ETHERNET SPEED
DUPLEX MODE
Select the desired combination of communication speed and transmission method.
To Next Page
Loading...
Need help?
General
