Toshiba e-STUDIO2820C - Default Setting; Restore Setting of the EFI Printer Board

e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
2 - 102
2.5.9 Default setting / restore setting of the EFI Printer Board
The codes whose value can be changed by performing "Default setting of the EFI Printer Board (08-
700)" or "Restore setting of the EFI Printer Board (08-9952)" are listed below.
Adjustment mode (05)
Setting mode (08)
Code Item
Default value
when 08-700 is
performed
Default value
when 08-9952 is
performed
7322-0 Tagbit extension processing for printing
(Black mode)
PS 1 1
7322-1 PCL 1 1
7322-2 XPS 1 1
8102-0 Tagbit extension processing for printing
(Color mode)
PS 1 1
8102-1 PCL 1 1
8102-2 XPS 1 1
8118-0 Sharpness adjustment / PS Text 128 128
8118-1 Graphics 128 128
8118-2 Image 128 128
Code Item
Default value
when 08-700 is
performed
Default value
when 08-9952 is
performed
482 Feeding retry setting 1 0
1006 Address Mode 1 2
1008 IP address 10 250 250 249 000 000 000 000
1009 Subnet mask 255 255 255 252 000 000 000 000
1010 Gateway 10 250 250 250 000 000 000 000
1011 Availability of IPX 2 1
1014 Availability of AppleTalk 2 1
1060 TCP port number of FTP server 50021 21
1073 Availability of Raw/TCP 2 1
1075 Availability of LPD client 2 1
1078 Availability of IPP 2 1
1089 Availability of FTP print 2 1
1103 Bonjour setting 2 1
1464 Samba server ON/OFF setting 2 1
1482 User data department management 0 0
1496 Operation setting for User authentication/registration 0 1
8508 Switchover of HP compatible 4.2 mm image printing
controlling method
00
8509 Controlling amount of HP compatible 4.2 mm image
printing
018
8510 Menu display setting of HP compatible 4.2 mm image
printing control (controlling method and amount)
00