3
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
ADJUSTMENT
3 - 1
3. ADJUSTMENT
3.1 Image Related Adjustment
3.1.1 Adjustment Order
This chapter mainly explains the procedures for image related adjustment. When replacing compo-
nents which have other specified instructions for adjustment, those specified instructions are to be
obeyed in priority.
In the following diagram, the solid lines with arrow lead to essential adjustments, while the dotted lines
lead to adjustments to be performed if necessary.
To Next Page
Loading...
