3
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
ADJUSTMENT
3 - 39
3.2.9 Setting range correction (Adjustment of background peak)
The levels of the background peak for the range correction at a Black Mode can be set at the following
codes.
This setting is valid only when the background peak is fixed.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment.
<Procedure>
The procedure is the same as that of P.3-32 "3.2.2 Density adjustment".
3.2.10 Adjustment of smudged/faint text
The smudge/faint text at a Black Mode can be set at the following codes.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment.
Note:
Remember the image specifications and life span of the replacing parts may not meet the stan-
dard when the setting value is changed from the default value.
<Procedure>
The procedure is the same as that of P.3-32 "3.2.2 Density adjustment".
Origi-
nal
mode
Original mode
Item to be adjusted Remarks
Text/
Photo
Text
Printe
d
Image
Photo Map
User
Cus-
tom
Glay
scale
Full
color
7779 7780 7781 7782 7783 7789 --- Automatic density mode The larger the
value is, the
lighter the
image
becomes. The
smaller the
value is, the
darker the
image
becomes.
Acceptable val-
ues: 0 to 255
(Default: 128)
7784 7785 7786 7787 7788 7790 --- Manual denstity mode
ACS
black
mode
7671 7672 --- --- --- --- --- Automatic density mode
7673 7674 --- --- --- --- --- Manual density mode
Black 7289 7290 --- --- --- 7238 7289 Automatic density mode
7292 7293 --- --- --- 7239 7290 Manual density mode
Color mode
Original mode
Item to be
adjusted
Remarks
Text/
Photo
Text
User
custom
Black 648 649 925 Adjustment of
smudged/ faint text
When the value decreases, the faint
text is improved. When the value
increases, the smudged text is
improved.
Acceptable values: 0 to 4
(Default: 2)
ACS
monochro
7102 7103 ---
To Next Page
Loading...
