Toshiba e-STUDIO2820C - SYS Board

e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
7 - 4
7.1.5 SYS board
(1) Take off the board cover.
 P.7-2 "7.1.2 Board cover"
(2) Take off the FAX cover.
 P.7-3 "7.1.3 FAX cover"
(3) Take off the hard disk.
 P.7-1 "7.1.1 Hard disk (HDD)"
(4) Remove 2 screws and take off 2 earth
plates.
Fig. 7-8
(5) Disconnect 3 connectors and the USB termi-
nal.
Fig. 7-9
(6) Remove 5 screws and release 1 clamp.
Take off the SYS board.
Fig. 7-10
Earth plate
SYS board