Toshiba e-STUDIO2820C - Setting Range Correction (Adjustment of Background Peak)

3
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
ADJUSTMENT
3 - 61
3.4.7 Setting range correction (Adjustment of background peak)
The levels of the background peak for the range correction at the Black Mode can be set at the follow-
ing codes.
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of  P.3-57 "3.4.2 Density adjustment".
Black
Gray
Scale
Item to be adjusted Remarks
Original mode
Text/
Photo
Text Photo
User
custom
7460 7461 7462 7464 7463 Background peak
adjustment for range
correction in the auto-
matic density mode
The larger the value is, the lower
the density of the image back-
ground (low density section)
becomes.The smaller the value
is, the higher the density of the
image background (low density
section) becomes.Acceptable
values: 0 to 255
7490 7491 7492 7494 7493 Background peak
adjustment for range
correction in the man-
ual density mode
Color
Item to be adjusted Remarks
Original mode
Text Photo
Printed
Image
User
custom
8366 8367 8368 8369 Background peak adjustment for
range correction in the automatic
density mode
The larger the value is, the lower
the density of the image back-
ground (low density section)
becomes.The smaller the value
is, the higher the density of the
image background (low density
section) becomes.Acceptable
values: 0 to 255
8376 8377 8378 8384 Background peak adjustment for
range correction in the manual
density mode