Toshiba e-STUDIO2820C - Switching Regulator

e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
7 - 6
7.1.8 Switching regulator
(1) Take off the rear cover-3.
 SERVICE MANUAL "3.5.20 Rear cover-
3"
(2) Remove 1 screw and take off the connector
cover.
(3) Disconnect 3 connectors.
Fig. 7-13
(4) Disconnect 7 connectors.
(5) Remove 2 screws.
(6) Slightly lift up the switching regulator and
release the hook.
Fig. 7-14
(7) Tilt the switching regulator to the front side
and take it off.
Fig. 7-15
Connector cover
Switching regulator