Toshiba e-STUDIO2820C - SRAM Board <For LGC Board>

e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
7 - 12
7.1.12 SRAM board <for LGC board>
7.1.13 SRAM board <for SYS board>
(1) Take off the board cover.
 P.7-2 "7.1.2 Board cover"
(2) Release 2 latches and take off the SRAM
board for the LGC board with the case.
(3) Release 2 latches and take off the SRAM
board for LGC board from the case.
Fig. 7-28
(1) Take off the board cover.
 P.7-2 "7.1.2 Board cover"
(2) Disconnect 2 connectors and take off the
HDD.
Fig. 7-29
(3) Release 2 latches and take off the SRAM
board for the SYS board with the case.
(4) Release 2 latches and take off the SRAM
board for SYS board from the case.
Fig. 7-30
SRAM board
(for LGC board)
Latch
Latch
Case
SRAM board
(for SYS board)
Latch
Latch
Case