e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 2
Paper weight Drawers /
PFP (optional)
64 g/m
2
to 256 g/m
2
(17 lb. Bond to 94.5 lb. Cover)
Bypass feeding
64 g/m
2
to 280 g/m
2
(17 lb. Bond to 150 lb. Index)
LCF (optional)
64 g/m
2
to 105 g/m
2
(17 lb. Bond to 28 lb. Bond)
Automatic
duplexing unit
Type Stackless, Switchback type
Acceptable paper size A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 8K, 16K, 16K-R,
305 x 457mm (A3Wide),
LD, LG, LT, LT-R, ST-R, COMPUTER, 13"LG, 8.5" x 8.5",
12" x 18" (Full Bleed)
Acceptable paper
weight
64 g/m
2
to 256 g/m
2
(17 lb. Bond to 94.5 lb. Cover)
Toner supply Automatic toner density detection/supply
Density control Automatic density mode and manual density mode selectable in 11
steps
Total counter Electronical counter
Memory (RAM) Main memory 1 GB
Page Memory 512 MB
HDD 80 GB
Account Codes 10,000 codes
Department Codes 1,000 codes
Machine version NAD: North America, Brazil
MJD: Europe
AUD: Australia
ASD: Asia, Hong Kong, Latin America
TWD: Taiwan
SAD: Saudi Arabia
ASU: Saudi Arabia, Asia
CND: China
KRD: Korea
ARD: Argentina
JPD: Japan
Warm-up time e-STUDIO2820C
e-STUDIO2830C
e-STUDIO3520C
e-STUDIO3530C
Approx. 99 sec. (100 V series) <Stand-alone, temperature: 20
o
C>
Approx. 89 sec. (200 V series) <Stand-alone, temperature: 20
o
C>
e-STUDIO4520C
Approx. 160 sec. <Stand-alone, temperature: 20
o
C>
Power requirements AC 110 V / 13.2 A, 115 V or 127 V / 12 A
220-240 V / 8 A (50/60 Hz)
* The acceptable value of each voltage is ±10%.
Power consumption 1.5 kW or less (100 V, 115 V)
1.6 kW or less (127 V)
2.0 kW or less (200 V series)
* The electric power is supplied to the RADF, Finisher, PFP and
LCF through the equipment.
Weight Approx. 121 kg ( 266.75 lb. ) (for NAD and MJD)
Approx. 123 kg ( 271.16 lb. ) (for others)
To Next Page
Loading...
