e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
5 - 32
5.7 PM KIT
A PM kit is a package for each unit of replacement parts requiring PM.
KIT name Component Part name Qty.
DEV-KIT-FC28K Drum cleaning blade BL-FC28D 1
Main charger grid GRID-CHARGR-MAIN-380 1
Needle electrode ELCTRD-CHARGR-MAIN-380 1
Main charger cleaner FILM-CLNR-CHARGR-380 2
Developer material D-FC28K 1
Developer unit filter
ASYS-DUCT-DEV-COV
1
Ozone filter 1 FLTR-OZN-F380 1
DEV-KIT-FC28CLR Drum cleaning blade BL-FC28D 3
Main charger grid GRID-CHARGR-MAIN-380 3
Needle electrode ELCTRD-CHARGR-MAIN-380 3
Main charger cleaner FILM-CLNR-CHARGR-380 6
Developer material (Y) D-FC28Y 1
Developer material (M) D-FC28M 1
Developer material (C) D-FC28C 1
TBU-KIT-FC28 Transfer belt cleaning blade BL-FC35TR 1
2nd transfer roller CR-FC35TR2 1
Blade seal (front side) SEAL-BLADE-CLN-TBU-F 1
Blade-seal (rear side) SEAL-BLADE-CLN-TBU-R 1
2nd transfer facing roller
cleaning mylar
MYLAR-CLN-TR2-WP-N 1
Ozone filter 2 FLTR-OZ-50-TNR-EX-450 1
FR-KIT-FC28 Fuser belt BT-FC35-FU 1
Fuser roller FR-FC28-U 1
Press roller HR-FC28-L 1
Separation finger SCRAPR-FUS-350 5
Fuser belt guide COLLAR-HR-T1 2
ROL-KIT-16CST Pick up roller ROLLER-PICK-AT 1
Feed roller K-ROLL-FEED 1
Separation roller K-ROLL-SPT 1
ROL-KIT-1010 Pick up roller ROL-PICK-UP 1
Feed roller ROL-PAPER-FED-F 1
Separation roller ROL-PAPER-FED-S 1
DF-KIT-3018 Pick up roller ASYS-ROL-FEED 1
Feed roller ASYS-ROL-FEED 1
Separation roller ASYS-ROL-RET 1
To Next Page
Loading...
