6
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
ERROR CODE AND TROUBLESHOOTING
6 - 3
E200 Paper transport jam 1st drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st
drawer feed sensor.
P. 6 - 2 9
E210 2nd drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st
drawer feed sensor.
P. 6 - 2 9
E220 2nd drawer transport jam (Paper not reaching the
1st drawer feed sensor): The paper does not reach
the 1st drawer feed sensor after it has passed the
2nd drawer feed sensor.
P. 6 - 2 9
E270 Bypass transport jam (Paper not reaching the regis-
tration sensor): Paper fed from the bypass tray and
passed through the bypass feed sensor does not
reach the registration sensor.
P. 6 - 2 9
E300 PFP upper drawer transport jam (Paper not reach-
ing the registration sensor): The paper does not
reach the registration sensor after it has passed the
1st drawer feed sensor.
P. 6 - 2 9
E310 PFP upper drawer transport jam (Paper not reach-
ing the 1st drawer feed sensor): The paper does not
reach the 1st drawer feed sensor after it has
passed the 2nd drawer feed sensor.
P. 6 - 2 9
E320 PFP upper drawer transport jam (Paper not reach-
ing the 2nd drawer feed sensor): The paper does
not reach the 2nd drawer feed sensor after it has
passed the PFP upper drawer feed sensor.
P. 6 - 3 0
E330 PFP lower drawer transport jam (Paper not reach-
ing the registration sensor): The paper does not
reach the registration sensor after it has passed the
1st drawer feed sensor.
P. 6 - 2 9
E340 PFP lower drawer transport jam (Paper not reach-
ing the 1st drawer feed sensor): The paper does not
reach the 1st drawer feed sensor after it has
passed the 2nd drawer feed sensor.
P. 6 - 2 9
E350 PFP lower drawer transport jam (Paper not reach-
ing the 2nd drawer feed sensor): The paper does
not reach the 2nd drawer feed sensor after it has
passed the PFP upper drawer feed sensor.
P. 6 - 3 0
E360 PFP lower drawer transport jam (Paper not reach-
ing the PFP upper drawer feed sensor): The paper
does not reach the PFP upper drawer feed sensor
after it has passed the PFP lower drawer feed sen-
sor.
P. 6 - 3 0
E3C0 Paper transport jam LCF transport jam (Paper not reaching the registra-
tion sensor): Paper fed from the LCF and passed
through the 1st drawer feed sensor does not reach
the registration sensor.
P. 6 - 2 9
E3D0 LCF transport jam (Paper not reaching the 1st
drawer feed sensor): Paper fed from the LCF and
passed through the 2nd drawer feed sensor does
not reach the 1st drawer feed sensor.
P. 6 - 2 9
E3E0 LCF transport jam (Paper not reaching the 2nd
drawer feed sensor): Paper fed from the LCF and
passed through the LCF feed sensor does not
reach the 2nd drawer feed sensor.
P. 6 - 3 0
Error code Classification Contents Troubleshooting
To Next Page
Loading...
