e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
2 - 2
• List print mode (9S): The procedure varies depending on the code.
<Operation procedure>
Notes:
Precautions when storing information into USB media
• When storing the setting information of the equipment into a USB media, be sure to obtain
permission from a user in advance.
• When storing the setting information of the equipment into a USB media, the information is
printed out in a CSV format. Handle and manage the information with extra care.
• Do not lose or leak the setting information of the equipment.
• Do not use the setting information of the equipment for purposes other than maintenance or
product services.
• Provide the information promptly if a user requires so.
[9][START]
[POWER]
PRINT
USB (CSV format)
(Code)
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
104: Stored information of pixel counter (toner cartridge reference)
105: Stored information of pixel counter (service technician reference)
106: Error history (Maximum 1000 items)
107: Error history (Latest 80 items)
108: Firmware update log (Maximum 200 items)
110: Power-ON/OFF log (Maximum 100 items)
[Digital keys]
Key in the first
code to be printed
[Digital keys]
Key in the last
code to be printed
[POWER]
OFF/ON
(Exit)
[START]
List starts to
be printed
[START] [START]
[9][START]
[POWER]
(Code)
201: Adjustment mode (05)
202: Setting mode (08)
(Code)
203: PM support mode
204: Stored information of pixel counter (toner cartridge reference)
205: Stored information of pixel counter (service technician reference)
206: Error history (Maximum 1000 items)
207: Error history (Latest 80 items)
208: Firmware update log (Maximum 200 items)
210: Power-ON/OFF log (Maximum 100 items)
[Digital keys]
Key in the first
code to be printed
[Digital keys]
Key in the last
code to be printed
[POWER]
OFF/ON
(Exit)
Connect
USB
Disconnect
USB
[START]
List starts to
be printed
[START] [START]
To Next Page
Loading...
