2
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
SELF-DIAGNOSTIC MODE
2 - 7
[0]
A LCF end fence home position sensor Fence home posi-
tion
Other than home
position
B LCF end fence stop position sensor Fence stop position Other than stop
position
C Empty sensor at LCF standby side No paper Paper present
D LCF side cover open/close switch Cover closed Cover opened
E LCF motor rotation status (Motor is rotating at
output mode (03))
Normal rotation Abnormal rotation
F LCF tray-up sensor Tray at upper limit
position
Other than upper
limit position
G LCF feed sensor No paper Paper present
H Empty sensor at LCF feed side Paper present No paper
Digital
key
Button Items to check
Contents
Highlighted display
e.g.
Normal display
e.g.
To Next Page
Loading...
