e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
POWER SUPPLY UNIT
9 - 4
The following are 2 output channels for the cover switch line.
• +5.1 V
+5.1VD: CN405 Pin 4
Output to the LGC board
• +24 V
+24VD1: CN405 Pin 5
Output to the LGC board
+24VD2: CN405 Pin 6
Output to the LGC board
+24VD3: CN405 Pin 7
Output to the LGC board, PFP/LCF (via LGC board)
High-voltage transformer (via LGC board)
+24VD4: CN406 Pin 2
Output to the Finisher
+24VD4: CN407 Pins 9, 10, 11 and 12
Output to the Finisher
Output voltage by the type of connector
Main switch line
Cover switch line
Connector Destination Voltage
CN402 For the SYS board +5.1VA, +5.1VB, +5VS, +12VA, +12VB
CN403 For the IMG board +5.1VB
CN404 For the LGC, PFP/LCF (via LGC board) +5.1VB, +12VB
CN405 For the LGC board +5.1VB
CN406 For the finisher +5.1VB
CN407 For the SLG board, RADF +5.1VB, +12VB
CN410 For the FIL board +5.1VB
Connector Destination Voltage
CN405 For the LGC board, PFP/LCF (via LGC
board, high-voltage transformer (via LGC
board)
+5.1VD, +24VD1, +24VD2, +24VD3
CN406 For the finisher +24VD4
CN407 For the SLG board, RADF +24VD
To Next Page
Loading...
