Toshiba e-STUDIO2820C - Page 80

e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
2 - 54
8348 Image Density
adjustment
Manual
adjustment
/ Dark step
value
Text SCN
(color)
20
<0-255>
SYS Sets the changing
amount per step of the
density adjustment but-
tons on the control
panel.
The larger the value is,
the darker the image of
the "dark" step
becomes.
1
8349 Printed
image
SCN
(color)
20
<0-255>
SYS 1
8350 Photo SCN
(color)
20
<0-255>
SYS 1
8361 Image Range correc-
tion adjust-
ment
(Manual den-
sity adjust-
ment)
Text SCN
(color)
1
<0-1>
SYS 0: Background peak -
Fixed
1: Background peak -
Varied
1
8362 Printed
image
SCN
(color)
1
<0-1>
SYS 1
8363 Photo SCN
(color)
1
<0-1>
SYS 1
8365 User
custom
SCN
(color)
1
<0-1>
SYS 1
8370 Image Fine adjust-
ment of back-
ground peak
adjustment
User cus-
tom mode
SCN
(color)
50
<0-50>
SYS Adjusts the level of
background. When the
value increases, the
background becomes
darker.
1
8371 Image Fine adjust-
ment of black
density
User cus-
tom mode
SCN
(color)
0
<0-4>
SYS Adjusts the black den-
sity of the scanned
image. When the value
increases, the black
density becomes
darker.
1
8372 Image RGB conver-
sion method
selection
User cus-
tom mode
SCN
(color)
0
<0-3>
SYS Sets the color space
format of the output
image.
0: sRGB
1: AppleRGB
2: ROMMRGB
3: AdobeRGB
1
8373 Image Saturation
adjustment
User cus-
tom mode
SCN
(color)
128
<0-255>
SYS The larger the value is,
the brighter the image
becomes. The smaller
the value is, the duller
the image becomes.
1
8375 Image Sharpness
adjustment
User cus-
tom mode
SCN
(color)
128
<0-255>
SYS When the value
increases, the image
becomes sharper.
When the value
decreases, the image
becomes softer.
The smaller the value
is, the less the moire
becomes.
1
8380 Image Density
adjustment
Fine curve
compensation
/ Center value
User cus-
tom mode
SCN
(color)
128
<0-255>
SYS The larger the value is,
the darker the image of
the center step density
becomes.
1
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e