Toshiba e-STUDIO2820C - Page 84

e-STUDIO2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
2 - 58
364 Scanner Data transfer of character-
istic value of scanner / SLG
board → SYS board
SCN - SYS Transfers the character-
istic values of the scan-
ner (shading correction
factor / RGB color cor-
rection / reproduction
ratio color aberration
correction / shading
position correction fac-
tor / reproduction ratio
correction value in pri-
mary scanning direc-
tion) from the SRAM of
the SLG board to the
SRAM of the SYS
board.
6
365 RADF RADF lead-
ing edge posi-
tion 1
adjustment
for single
sided orig-
inal
ALL 50
<0-100>
SYS When the value
increases by “1”, the
copied image of original
fed from the RADF
shifts toward the trail-
ing edge of paper by
approx. 0.2 mm.
1
366 for double
sided orig-
inal
ALL 50
<0-100>
SYS 1
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e