2
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
SELF-DIAGNOSTIC MODE
2 - 65
Main charger
[Cleaning] 1389
[Charger] 808
Developer
[Toner nearly empty] 1415, 1416, 1416-0 to 3, 6452-0 to 3, 6453-0 to 3, 6454-0 to
3, 8523, 9804
[Toner cartridge rotation
counter]
1376-0 to 3
[Toner density ratio manual
offset control]
2707-0 to 3
[Dried color toner] 2692, 2693
[Used toner mixing paddles] 4551-0 to 1, 4554-0 to 1, 4561, 6209-0 to 2
[Used toner motor lock
detection]
4595
[Enforced toner supply] 2411-0 to 2, 2412-0 to 2, 2413-0 to 2
[Toner cartridge] 499
Paper exit
[Paper exit speed control
switching]
4563
[Duplex reversing position
correction control]
4564
Transfer
[1st transfer] 816, 2512
[2nd transfer] 2490
[Resistance detection] 2511
[Transfer bias] 2510
Cleaner [Drum reverse rotation
amount control]
2367
[Discharge blade] 2553
Fuser
[Temperature] 409, 410-0 to 3, 412-0 to 1, 413-0 to 1, 434, 437-0 to 1, 438,
448, 450-0 to 3, 451-0 to 1, 452, 453, 518-0 to 1, 531, 534-0
to 4, 1902, 1903, 1904, 2017-0 to 3, 2018-0 to 3, 2019-0 to
3, 2151-0 to 3,
2153-0 to 1, 2155-0 to 1, 2159-0 to 1, 2161, 2255, 4545,
5277-0 to 5, 5285-0 to 3, 5293-0 to 3, 5294-0 to 3, 5295-0 to
3, 5296-0 to 3, 5409, 5410
[Intermittence setting] 5449-0 to 6
[Status counter] 400
[Fuser reverse rotation set-
ting]
4569
[Pre-running] 417-0 to 1, 439-0 to 1, 440-0 to 1, 441-0 to 1, 517, 526, 584,
855, 2020-0 to 3, 5280-0 to 1
[Fuser unit] 4549
[Fuser unit voltage determi-
nation]
4591
Image processing [Counter] 1371, 1372, 1378, 1380, 1382, 1383, 1385, 1386, 1387,
1388
RADF [Switchback] 462
Finisher
[Stapling] 704-0 to 1, 1911, 9811-0 to 3, 9937-0 to 3, 9938-0 to 3
[Hole punching] 9847
[Finisher model switching] 1912
Classification Setting Mode (08)
To Next Page
Loading...
