November 2003 © TOSHIBA TEC 3 - 9 e-STUDIO3511/4511 ADJUSTMENT
(*5) 1: Single-sided grid pattern in Black Mode
3: Double-sided grid pattern in Black Mode
55: Grid pattern of thick paper 2 in Full Color Mode
56: Grid pattern of thick paper 3 in Full Color Mode
57: Grid pattern of OHP film in Full Color Mode
58: Single-sided grid pattern of thick paper 2 in Black Mode
59: Single-sided grid pattern of thick paper 3 in Black Mode
60: Single-sided grid pattern of OHP film in Black Mode
Note:
If the aligning amount is too large, abnormal noise (paper-folding noise) or actual paper folding may
occur during paper feeding. If the aligning amount is too small, on the other hand, a skew, an image
dislocation in feeding direction or a paper exit jam (E010) may occur. Pay attention to the above
and select the appropriate value.
To Next Page
Loading...
