Toshiba e-STUDIO3511 - Page 234

e-STUDIO3511/4511 ADJUSTMENT 3 - 44 November 2003 © TOSHIBA TEC
Remarks
When the value increases, the image is zoomed in.
When the value decreases, the image is zoomed out.
Acceptable values: 0 to 255 (Default: 128)
* 0.1%/step
Code
884
<Adjustment Mode (05)>
3.7.11 Reproduction ratio of primary scanning direction (black)
The reproduction ratio of primary scanning direction with the resolution other than 600 dpi is adjusted
in Scanning Function for black image.
<Procedure>
Procedure is same as that of “3.7.2 Density adjustment”.
<Procedure>
Procedure is same as that of “3.7.2 Density adjustment”.
3.7.12 Reproduction ratio of primary scanning direction (color)
The reproduction ratio of primary scanning direction with the resolution other than 600 dpi is adjusted
in Scanning Function for color image.
Remarks
When the value increases, the image is zoomed in.
When the value decreases, the image is zoomed out.
Acceptable values: 0 to 255 (Default: 128)
* 0.1%/step
Code
1060
<Adjustment Mode (05)>