e-STUDIO3511/4511 ADJUSTMENT 3 - 90 November 2003 © TOSHIBA TEC
(5) Connect the connector of the counter socket
to the harness connector of the equipment
side.
(6) Install the counter socket to the machine frame
with two M3 screws.
(7) Reattach the covers.
(9) Key in the value “3” in the setting mode (08-
222).
(8) Insert the key copy counter with its arrow mark
pointing the rear side of the equipment.
Screw
Counter socket
Harness connector
Key copy counter
Fig. 3-1504
Fig. 3-1505
To Next Page
Loading...
