November 2003 © TOSHIBA TEC 5 - 99 e-STUDIO3511/4511 TROUBLESHOOTING
[402F] Page memory size error
This error occurs when the expansion memory is not installed or the expansion memory has an
abnormality.
Check if the expansion memory exists or not, or it is correctly installed.
[4031] HDD full failure during printing
Reduce the number of pages of the job in error and perform the job again.
Check if the server or local disk has a sufficient space in disk capacity.
[4032] Private-print-only error
Select "Print", and then perform the printing again.
[A221] Print job cancellation
This message appears when deleting the job on the screen.
[A222] Print job power failure
When there are running jobs, perform the job in error again after the completion of the running jobs.
If the error still occurs, turn the power OFF and then back ON, and perform the job again.
05/05
To Next Page
Loading...
