e-STUDIO3511/4511 FIRMWARE UPDATING 6 - 14 November 2003 © TOSHIBA TEC
(9) “Update Completed!!” is displayed at the bottom of the LCD screen after the updating is
completed properly.
“Update Failed.” is displayed at the bottom of the LCD screen when the updating is not com-
pleted properly. Turn OFF the power, and then check the following items. After confirming and
clearing the problems, restart updating from the beginning.
• Is the download jig connected properly?
• Is the updating data written to the download jig properly?
• Do the download jig and the equipment operate properly?
To Next Page
Loading...
