Toshiba e-STUDIO3511 - RGB Adjustment

November 2003 © TOSHIBA TEC 2 - 77 e-STUDIO3511/4511 ERROR CODE AND SELF-DIA GNOSTIC MODE
Procedure 9
Procedure 10
Procedure 11 and 12
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Select button]
[START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
(Stores value in RAM)
[0][8]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(1st setting)
[Digital key]
(2nd setting)
[START] [START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
[CLEAR]
(Corrects value)
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
or
[Software keyboard]
[START]
[CANCEL]
[CLEAR]
(Corrects value)
*2
(Stores value in RAM)
*1
[MONITOR/PAUSE]
Sets or
changes value
()
[ENTER]
*1. Press [MONITOR/PAUSE] to enter "-", when
entering telephone number.
*
2.
The data are stored in SYS-RAM in procedure
11 and stored in NIC-RAM in procedure 12.
Procedure 7
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Setting)
[CLEAR]
(Corrects value)
[START]
(HDD formatting)
[CANCEL]
[ENTER]
or
[INTERRUPT]
(Stores value in RAM)
Procedure 14
[0][8]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Sub-code)
[CLEAR]
(Corrects value)
[START] [START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
Adjustment value
cannot be changed