88
3.SETTING OF BASIC COPY MODES
5.DUPLEX COPYING (Cont.)
3
1. 1-Sided Originals -> 1-Sided Copies (default setting)
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Confirm that the [1 1 SIMPLEX] mode is
selected in the basic menu.
- If the “1-SIDED 1-SIDED” mode is not selected, press the
button (highlighted) in the menu on the right, and then press the
[1 1 SIMPLEX] button on the next screen.
z Select other copy modes as required.
4
Press the [START] button.
2. 1-Sided Originals -> 2-Sided Copies
The use of Image Direction will create the booklet output when copying landscape oriented originals. See
"13.DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1”" Page 130 for details.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 59), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
To Next Page
Loading...
