89
3
3
On the basic menu, press the highlighted
button on the right.
4
Press the [1 2 DUPLEX] button.
z Select other copy modes as required.
5
Press the [START] button.
- When placing an original on the glass, follow step 5 to 6 on page
"Copying Procedure" Page 52 continuously.
3. 2-Sided Originals -> 2-Sided Copies
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 59), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
On the basic menu, press the highlighted
button on the right.
To Next Page
Loading...
