2 SETTING ITEMS (ADMIN)
102 Setting Network Functions
2
Press [IPv6].
The IPv6 screen is displayed.
3
Specify the following items as required and press .
IPv6 PROTOCOL — Press [ENABLE] to enable the IPv6 protocol, or [DISABLE] to disable the IPV6 protocol.
LLMNR — Press [ENABLE] to enable the LLMNR (Linklocal Multicast Name Resolution) protocol, or [DISABLE] to
disable the LLMNR protocol.
ADDRESS MODE — Select [MANUAL].
Link Local Address — The unique address used for the IPv6 is displayed.
y The link local address cannot be connected to another routed IPv6 network.
y [ENABLE] and [DISABLE] for the LLMNR protocol are available when you select [ENABLE] for the IPv6
protocol.
To Next Page
Loading...
