3 MANAGING COUNTERS (COUNTER MENU)
180 Managing Department Codes
Resetting all department counters
This function clears all department counters to “0”.
y This function is available only when the department code is enabled.
y This function clears only the department counters. You cannot clear the total counter.
1
In the DEPT. MANAGEMENT menu, press [RESET ALL COUNTERS].
The clear confirmation screen is displayed.
For instructions on how to display the screen above, see the following page:
P.176 “Logging on as administrator”
2
Press [YES] to clear all department counters.
Press [NO] to cancel the clear operation.
To Next Page
Loading...
