2 SETTING ITEMS (ADMIN)
114 Setting Network Functions
4
Continue to another network setting if required, then press [APPLY NOW].
The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network interface
card to apply the changes.
Setting the AppleTalk protocol
The AppleTalk protocol must be enabled and properly configured to enable AppleTalk printing with a Macintosh computer.
1
Press [NETWORK] in the ADMIN menu.
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
P.69 “Entering Admin Menu”
2
Press [APPLETALK].
The APPLETALK screen is displayed.
To Next Page
Loading...
