3 MANAGING COUNTERS (COUNTER MENU)
190 Managing Department Codes
Setting output limitations for all departments
This function allows you to set the output limitations for all departments through a single operation.
When you select [ON], output will be disabled for all departments.
When you select [OFF], unlimited outputs will be allowed for all departments.
When you select [ON], the limitation settings for each department code will be set to [ON] and the [Limitation] box will
be set to “0”. If you want to change the limitation settings for each department code, change the limitation settings by
editing a department code.
P.185 “Editing department codes”
1
In the DEPT. MANAGEMENT menu, press [ALL LIMIT].
The ALL LIMIT screen is displayed.
For instructions on how to display the screen above, see the following page:
P.176 “Logging on as administrator”
To Next Page
Loading...
