1 SETTING ITEMS (USER)
Setting Scan Functions 25
Setting Scan Functions
You can change the initial settings (defaults) for scan jobs.
For the e-STUDIO455 Series or e-STUDIO855 Series, [SCAN] in the USER meu is available only when the Scanner
Kit (optional) or Printer/Scanner Kit (optional) is installed.
1
Press [SCAN] in the USER menu.
The SCAN screen is displayed.
y When you are using the e-STUDIO6530C Series, e-STUDIO4520C Series, or e-STUDIO455 Series, see the
following page:
P.25 “Setting Scan Functions (e-STUDIO6530C Series, e-STUDIO4520C Series, e-STUDIO455 Series)”
y When you are using the e-STUDIO855 Series, see the following page:
P.28 “Setting Scan Functions (e-STUDIO855 Series)”
To display the USER menu, see the following page:
P.8 “Entering User Menu”
Setting Scan Functions (e-STUDIO6530C Series, e-STUDIO4520C Series, e-STUDIO455
Series)
1
Specify the following items as you require and press .
COLOR MODE — Press the desired mode button.
COMPRESS — Press the desired mode button that applies to scan jobs in gray scale, full color, or auto color
mode.
SINGLE/2-SIDED SCAN — Press the desired mode button.
y [SINGLE] — Press this button to set single page scan mode as the default scan mode.
y [BOOK] — Press this button to set book scan mode as the default scan mode. This enables scans of both
sides of originals in the same direction.
y [TABLET] — Press this button to set tablet scan mode as the default scan mode. This enables scans of the
front page in the general direction, and scans of the back page rotated 180 degree.
ROTATION — Press the desired mode button.
To Next Page
Loading...
