2 SETTING ITEMS (ADMIN)
120 Setting Network Functions
2
Press [OTHER].
The OTHER screen is displayed.
3
Specify the following items as required and press [OK].
ENABLE LDAP — Press [ENABLE] to enable the LDAP network service, or [DISABLE] to disable it.
[SNMP READ COMMUNITY] — Press this button to enter the SNMP read community name for SNMP access if
required.
ENABLE IP FILTERING — Press [ENABLE] to enable the IP filtering function, or [DISABLE] to disable it.
ENABLE MAC ADDRESS FILTERING — Press [ENABLE] to enable the MAC address filtering function, or
[DISABLE] to disable it.
When you press [SNMP READ COMMUNITY], the on-screen keyboard is displayed. Enter a value using the
keyboard and digital keys, and press [OK] to set the entry.
y If you specify a community name other than “public” for the read community, the applications that use MIB
(TopAccessDocMon, TWAIN driver, File Downloader, and AddressBook Viewer) will be unavailable. The
SNMP communication of the printer driver also will be unavailable, and obtaining the configurations,
confirming the department code, and obtaining the available boxes in e-Filing will be disabled.
y When the Read Community option is blank, SNMP communications between the SNMP browser of the
client PC and this equipment will be disabled.
To Next Page
Loading...
