2 SETTING ITEMS (ADMIN)
134 Setting E-mail Functions
2
Specify the following items as required and press [OK].
[FROM ADDRESS] — Press this button to enter the e-mail address of this equipment.
[FROM NAME] — Press this button to enter the identification name of this equipment.
[BODY] — Press this button to enter the body message.
FRAGMENT MESSAGE SIZE (KB) — Press the desired fragment size button. Press [NONE] to disable the
fragmentation.
BODY STRING TRANSMISSION — Press [ENABLE] to enable the body string transmission, or [DISABLE] to
disable the body string transmission.
y To enable Scan to E-mail, you must enter an e-mail address in the [FROM ADDRESS] box.
y [BODY STRING TRANSMISSION] appears only for the e-STUDIO455 Series and e-STUDIO855 Series.
When you press each button ([FROM ADDRESS], [FROM NAME] and [BODY]), the on-screen keyboard is
displayed. Enter a value using the keyboard and digital keys, and press [OK] to set the entry.
To Next Page
Loading...
