2.SETTING ITEMS (ADMIN)
IEEE 802.1X Authentication Setting 157
2 SETTING ITEMS (ADMIN)
3
Confirm the settings and press [APPLY NOW].
The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network interface
card to apply the changes.
[CRL Verification] shows whether the certificate revocation list (CRL) is enabled or disabled. To use CRL, it is
necessary to upload the certificate revocation list to the equipment from the TopAccess - Security Service
menu. Changing the CRL verification option from [Enable] to [Disable] or vice versa is also performed from
TopAccess. For details, refer to the TopAccess Guide.
Setting PAP for inner authentication
1
Select [PAP] and press [Next].
The WIRED 802.1X SETTINGS (PAP) screen is displayed.
To Next Page
Loading...
